DC SERIES

TSI DC 180

A 180 kW DC charger with two CCS2 connectors, a 150–1,000 VDC output range and forced-air cooling. The dual-connector configuration provides 90 kW per connector.

Total equipment power: 180 kW
Product series: DC Series

Match the specifications to your vehicle and site. Discuss installation configuration and quotation details with the TSI team.

PRODUCT DATA

Technical specifications.

Check power, connectors and installation requirements before choosing your charger.

Charging output

System output power	180 kW total · 90 kW per gun in a dual-connector configuration
DC voltage range	150–1 000 VDC
Maximum current per connector	350 A
Connectors	2 × CCS2 · top-mounted
Power modules	6 × 30 kW / 1 000 V
Charging cables	2 × CCS2 · 350 A
Efficiency	≥ 95 %
Voltage / current accuracy	≤ ±0.5 % / ≤ ±1 %
Energy metering	DC energy meter

Electrical supply

AC input voltage	380 V AC ±15 % · 3-phase 5-wire
Input frequency	50 / 60 Hz
Maximum input current	291 A at full load
Power factor	≥ 0.99
Input current THD	< 5 % at rated input

Interface and connectivity

Display and interface	10″ touch LCD · RGB panel LED
Charging start methods	RFID ISO/IEC 14443 A/B · QR
Charging modes	Auto · time · amount · energy · SOC
Protocol	OCPP 1.6J
Connectivity	LAN 10/100M · internal LTE 3G/4G
Vehicle communication	DIN 70121 & ISO 15118 (CCS PLC)

Operating conditions

Environmental / impact protection	IP55 / IK10 · IK08 screen
Cooling	Forced air · ≤ 65 dB
Operating temperature	−40 °C … +50 °C
Storage temperature	−40 °C … +75 °C
Humidity	5–95 % RH non-condensing
Operating altitude	≤ 2 000 m

Dimensions, protection and warranty

Dimensions W × D × H	836 × 801 × 2 046 mm
Weight	425 kg
Installation	Floor-standing cabinet
Emergency stop	Yes
Standards	EN 61851-1 · -23 · -24
EMC	IEC 61851-21-2
Certification	CE
Warranty	12 months

Actual charging power depends on the vehicle, battery voltage, power sharing and operating conditions. Installation configuration and warranty terms are set out in the quotation.

SELECTION CONSIDERATIONS

Choose for your planned use.

Vehicles and simultaneous charging

TSI DC 180 has two CCS2 connectors. Check the vehicle’s voltage, current requirements and protocols; a matching connector type alone does not confirm compatibility.

For simultaneous charging, plan each vehicle’s needs around the 90 kW per connector specified for the dual-connector configuration. 180 kW is the charger’s total power.

Site requirements and quotation scope

Provide the electrical capacity, parking layout, cable routes and maintenance access, together with the number of vehicles, energy needs and available charging time.

Make sure the quotation specifies the equipment, installation scope, testing, handover and maintenance coverage. The required work depends on site conditions.

Actual charging power depends on the vehicle’s charging capability, battery condition and operating conditions. A higher charger rating does not necessarily mean faster charging for every vehicle.

Compare specifications EV charger selection guide View maintenance services Discuss TSI DC 180

COMMON QUESTIONS

Frequently asked
questions.

How should I use these specifications?

Review the listed power, connectors, voltage and operating conditions. Share your vehicle specifications and site conditions so TSI can discuss the configuration and installation requirements.

How is vehicle compatibility confirmed?

Match the connector type, voltage range, current requirements, and protocols to the vehicle specifications. Confirm the configuration before selecting equipment.

What are the installation and maintenance requirements?

Power supply readiness, installation space, and maintenance access are assessed against site conditions. Installation and maintenance scope are defined in the proposal.

OTHER OPTIONS